DESIGN & ARCHITECTURE
WHO WILL KNOW
HOW TO MAKE IT?
Historical Arts & Casting preserves more than architectural metalwork. It safeguards the increasingly rare knowledge required to make, repair, and understand it.
REBECCA ETORIA

I wonder whether the Knickerbockers of the Gilded Age ever considered who would care for the elaborate metalwork they commissioned. As bronze doors, cast-iron façades, ornamental grilles, and grand lanterns took their places in the architecture of their lives, did they imagine the hands that would one day be needed to repair them?
Today, those repairs depend on more than a surviving drawing or a fragment of ornament. Someone must understand how the original was patterned, cast, joined, finished, and installed. The same knowledge serves architects commissioning new work intended to endure. Whether restoring a historic entrance or creating one for a contemporary home, the question is immediate: who knows how to make it?
That question has followed Historical Arts & Casting almost from the beginning. The Utah-based company grew out of a preservation problem in Salt Lake City in the 1970s, when architect Steven T. Baird was charged with saving the elaborate cast-iron façade of the historic ZCMI department store. Parts of the nineteenth-century ornament were damaged or missing, and finding craftsmen who could reproduce them proved far more difficult than expected.

The solution was not simply to locate a manufacturer; the process itself had to be recovered. Patterns had to account for the shrinkage of molten metal as it cooled. Missing ornament required sculptural reconstruction. Molds needed to reproduce detail convincingly enough that old and new components could coexist. Support systems had to be engineered so the restored pieces could return to the building rather than survive as artifacts in storage.
The craftsmen assembled around that undertaking eventually became Historical Arts & Casting, and the problem they were solving remains remarkably relevant today. We are good at saving buildings. We are less practiced at saving the knowledge required to repair them.
Walk through the company’s work today and the word fabrication feels inadequate. A commission may begin with historical research, measured drawings, fragments of surviving ornament, an architect’s sketch, or, in the case of new work, an idea that has never existed before. Before metal is poured or cut, someone must first understand what the finished piece needs to become.
That often begins with a pattern. The patternmaker has to think ahead to a material that does not yet exist in solid form. Bronze, iron, or aluminum will behave differently after leaving the mold. Dimensions change. Connections matter. A decorative crest, cast panel, lantern arm, door surround, fountain element, or ornamental grille that appears effortless when installed may have required numerous stages of sculpting, molding, casting, machining, welding, chasing, fitting, and finishing before it ever reached the building.
A rare stone can still be ordered. A discontinued chair can sometimes be found at auction. A master patternmaker who understands how an ornamental casting will shrink as it cools is considerably harder to replace.
That distinction matters well beyond restoration. Historical Arts & Casting works across historic preservation and new commissions, producing architectural elements in cast iron, bronze, aluminum, copper, and other metals. Doors, gates, grilles, façades, fountains, skylights, lanterns, railings, and sculptural ornament move through many of the same hands and processes whether they are recreating a nineteenth-century detail or realizing something conceived by a contemporary architect.


The knowledge travels in both directions. Understanding how an old bronze entrance was assembled can influence the engineering of a new one. Knowing why a historic skylight survived can shape the detailing of its contemporary counterpart. A fountain or grille from another era becomes not a style to imitate, but a source of practical intelligence.
That is particularly evident in the firm’s use of full-scale mockups. On paper, a monumental door may appear perfectly proportioned. A lantern may look convincing in elevation. A decorative grille may seem to possess the right weight and transparency. Full size is less forgiving. Once an element is standing at human scale, the eye immediately understands whether an ornament is too shallow, a frame too heavy, a finish too uniform, or a connection more visible than the architect intended.
The mockup is where an idea stops being theoretical.
It is also where architecture becomes tactile. A door must convey weight without becoming cumbersome. A grille has to negotiate privacy and transparency. A fountain asks metal to coexist with water for decades. A skylight must be structurally precise while remaining visually light. A lantern can alter the scale of an entrance before it ever casts light.
These objects sit in a peculiar category. They are part of the building, yet they are touched, opened, passed through, weathered, polished by use, and altered by time. Bronze becomes brighter where hands repeatedly meet it. Patinas deepen elsewhere. Cast iron acquires minute variations that no applied decorative finish can convincingly anticipate.
Time finishes the work.

Historical Arts & Casting’s custom metalwork follows the sweeping curve of a grand staircase, uniting precise geometric detailing with architectural elegance.
Architecture by John B. Murray Architect
Photography by Durston Saylor
For residential architects and interior designers, that quality has become increasingly valuable. Bespoke architectural metalwork can introduce a degree of specificity that catalogued objects simply cannot. A bronze entrance can establish the character of a façade, a custom grille can transform a threshold, and a sculptural lantern can change the reading of an entire room or exterior elevation. The value lies not merely in something being handmade, but in its proportions, finish, engineering, and relationship to the architecture being resolved for one particular place.
That requires an unusually broad chain of expertise. Once a piece leaves the foundry, the work is not necessarily finished. Castings may require machining. Separate components are fabricated and joined. Surfaces are chased and corrected by hand. Finishes are built gradually rather than applied as cosmetic coatings. Installation then brings a new set of problems because existing architecture, particularly historic architecture, has a habit of resisting the precision promised by drawings.
A wall is slightly out of square. An opening has shifted. Structure sits where records said it would not. The installer who understands how the piece was made has options that someone simply assembling a delivered product does not.
This continuity is one reason Historical Arts & Casting feels increasingly unusual. Modern construction has become extraordinarily good at specialization. Design, engineering, fabrication, finishing, and installation can happen in different offices, factories, states, or countries. Efficiency has obvious advantages, but something is inevitably lost when the people resolving the final installation have little relationship to those who developed the original object. At Historical Arts, those disciplines remain close enough to speak to one another.


Technology is part of that conversation rather than its opponent. Digital modeling, engineering, machining, and contemporary fabrication techniques can sit comfortably beside sand casting, lost-wax processes, hand chasing, sculpting, and patination. Precision has changed. The need for judgment has not.
A computer can describe a curve with extraordinary accuracy. It cannot decide whether a door surround feels too heavy, whether a lantern is out of scale, or whether a grille has the right degree of transparency once it meets the architecture. That decision still belongs to someone.
The stakes become clearer when important historic work returns decades later. The ZCMI façade that helped set Historical Arts & Casting in motion did not simply disappear into preservation history. When downtown Salt Lake City underwent another major redevelopment, portions of the historic cast-iron façade again required dismantling, conservation, and reintegration.
There is something fitting in that return. The building had survived long enough to need the craftsmen again, and the craft had survived long enough to answer.
For David Teague and the generations of craftspeople working at Historical Arts & Casting, this may ultimately be the company’s most important product. Not the bronze door, cast façade, lantern, fountain, grille, skylight, or one-off architectural commission, however extraordinary. The real inheritance is knowledge passed from one set of hands to another.
“Without this type of skill and knowledge transfer, it will not take long for companies with this kind of capacity to disappear from our culture—and when that does happen, they will not return without tremendous effort,” says Teague. “As we enter our third generation of this kind of preservation, our company remains committed to persevering in this manner with the goal of maintaining our level of craftsmanship for many future generations to follow.”
For anyone commissioning architectural metalwork today, that continuity matters from the first drawing. The expertise that allows a historic façade to be restored also allows a new bronze door, lantern, or railing to be conceived with an understanding of how it will be made, installed, used, and eventually maintained.
The Knickerbockers left us the objects. Keeping the knowledge alive is work that belongs to the present.
Discover more of Historical Arts & Casting’s work at historicalarts.com.

Join our mailing list to receive curated updates, special features, and invitations to events that define the world of the discerning few.
Sign up today and never miss what’s next.

